Install speakers at car doors

How to Install Car Speakers in Door

"Brainy Consumer is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. I get commissions for purchases made through links in this post"

There are many gadgets in your vehicle, is that true? Yes, there are lots from the safety gadgets to the entertainment gadgets that make the car worthwhile. If you are one of the guys who believe in a detailed vehicle, you need not worry anymore. This guide shows you exactly how you can do that without spending a penny on experts—the guide shows how you can install car speakers indoors fast and efficiently.

What You Need To Install Car Speakers in the Door

Before you even know how to install the car speakers in the door, what do you need to achieve? These questions that you need to ask yourself before you take any step. The primary tools that you will use for the installation are many, and the following are some of them:

  • Crew drivers of varied sizes
  • A driller
  • The Torx drivers
  • Socket wrench
  • Electrical tape
  • Hobby knife
  • A file
  • Soldering iron
  • Wire cutter or pliers
  • Climbing tool

How Then Do You Install the Car Speakers Using These Tools?

After collecting all these tools in place, you only need six steps to have your speaker installed. Here are the steps to ensure that your car speakers are installed in the door quickly and fast.

1.     Disconnect the Old Car Battery

Before you install the speakers on the car, you need to first disconnect the car battery by removing the negative wires. The door needs to be very wide open hence cannot be achieved by keeping the battery on, which may lead to extra drainage of bare power. Therefore disconnecting the battery power is very effective and efficient.

2.     Remove the Speakers as You Pay Attention to the Wiring Harness.

The second step is to remove carefully the factory speakers or whichever speakers you are using. When doing this, pay close attention to the wiring harness and not rip it out as you remove the old speakers. Similarly, you can also unscrew some of the screens that hold the old speakers together in the car. Therefore, you will use the screwdrivers to do that.

3.     Fix the New Speakers to the Wiring Harness of the Factory

After successfully removing the factory speakers or the old speakers’ altogether, you now need to have the new speakers at hand. Consequently, as you hold the new speakers, attach them to the wiring harness of the factory.

You need to understand the necessary speaker wire procedure before connecting the new speakers to the door. That is to say, in case you need a pair of amplifiers for more sound in the speaker or the car, you will be able to build a couple of speakers.

These speakers must have a unique mechanism of wiring altogether. In this manual, we look at the installation of a pair of speakers.

Primary Wiring Basics for a Pair of Speakers

Before you wire your speakers during installation, decide where to run your wires through your selected compartments. Where will your new speakers be housed? In case you are doing new wiring, be careful not to attract short circuits through touched the available wires to the metal or holding the wrong wire altogether.

In many instances, however, the factory wiring is color coated. This coating assists you in understanding the wiring process much more comfortable and better. At the time, you will strip the coated wire a bit to expose the copper wire to install the new speakers.

In the case of the speakers you have contained a plug, it will help you in ensuring that you remove the harness and fit them directly to the new speakers. This process even makes things more comfortable here.

In the coated wires, note the following:

  • Black means negative wire and should take the negative statement of the speaker.
  • White means neutral wire and should conform to the neutral terminal of the speaker.

4.     Test the Speakers before Fitting Them Firmly

Before you ensure that the speakers get firm in their installation places, test if they will avoid beginning the task afresh. Ensure that all the wiring is done correctly, and everything is working the right way before you tighten the nuts and bolts if need be.

You need to jam the wiring with the rubber funnel to safeguard it from the fitting holes’ sharp and narrow edges. This will make it very flexible between couples of holes. It will also ensure that the insulation is kept off the damage from the portion of the door jamb or the hinge firing tightening.

You also need to position the wire not to be damaged by the door jamb and the hinge. Here, you can leave adequate loose space to allow the door to open as appropriate.

5.     Double-Check the Connections

Dealing with wires is a risky thing and process. Also, look at the functions of the speaker once more to be sure of what is in place and what is not in place.

Switch on the radio, or connect the wires to listen to some cool music as another test to the speakers’ functioning. Are the speakers working, right? Yes, they are okay and enjoy the rhythm, no, check what is wrong, and refit it as required.

6.     Secure any Exposed Wires

Do not leave any necked wire exposed in the car since it can turn harmful. You should use the electric tape to secure any exposed wires in the car after ensuring that everything is working fine.

The Bottom Line

The safety installation of car speakers is straightforward. You can do something at home, in the garage, and even anywhere provided; you understand what you need to do. Therefore, this guide is of great importance since it spells you the required steps to installing your car speakers indoor. With these six steps, be sure to have your car speakers installed and functional.

Leave a Reply